YOUR SAFETY IS CLOSE TO OUR HEART

At the latest electronic tester every ski gets tested according to Önorm before handing out.

WHY Ski-/ Boardtuning

The answer is very easy: You have more fun at the pist. The easy explaining:

1. Less exertion means less danger of accident. Professional edge grinding ensures intransigent foothold also on icy pists. It saves strength and raises safety. Together it gives a pists- feeling which you sure do not want to miss!

2. Easier turning and gliding. Optimal structure cut guarantees the perfect torque and casual easy gliding with all snow terms.

BEFORE Edges are rusty and blunt Covering is scratched Covering has no structure

AFTER Edges are perfectly tuned Planed and waxed covering Structure cut

WHEN Ski-/ Boardtuning

How often you accomplish a tuning depends on snow terms, and the area and your sports level. Greater damages of covering or edges should get repaired directly.

Sport enter Serfaus advices a tuning

1. Before the first downhill in winter

2. after each 4 days on pists

3. And at the end of season.

Constant tuning and a few easy tending strategies which you can do on your own keep your skies/ boards in good repair!

• Clean and dry covering and edges after every skiing day.

• Use hot wax often to save your covering.

• Possible damages should get repaired directly.

• Keep your skies/ board in a cool, dry place.

A tuning and a fat film of wax at the end of season holds your sports equipment fit until the next winter season.

CHECK it yourself

If a tuning should get accomplished no one can better assess than you:

1. You cannot pull a carving swing on an icy pist? Time for an edge grinding!

2. To slow speed on a plane pist? It is high time for a refreshment of covering!

3. Your ski or board flutters in gliding passages! Sandstone you’re covering profile urgent!

WHAT happens at Ski-/ Board Tuning?

Perfect tuning means, the accomplishment of your skies/ board adapt to your skiing performance. Tell the service technician which style of skiing you prefer and which area you like best. With this information he can align the tuning exactly to you!

The 5 basic Steps of Ski-/ Board tuning:

1. Inspection. Upper side, covering and edges get wiped clean to take off the dirt. Then your skies/ board get checked for damage.

2. Covering repair. Following all dents, chamfers or holes get filled with covering material.

3. Covering cut. Then the complete covering gets cut and structured. Thereby the covering can ingest more wax. The emerging covering profile is the best dodge to avoid the undertow and the friction between covering and snow. The effect: Your skies/ board glide in a better way and perform the change from edge to edge easier. As you know, different temperatures and snow conditions presuppose different structures. Your technician knows exactly which one.

4. Edges cut. It depends on the accomplishment you expect of your sports equipment, the edges get „taken down“between 0 and 2 grades. The revolutionary WINTERSTEIGER Ceramic Disc Finish with integrated fun factor guarantee arranges for a perfect foothold on the pist. Look forward to a high degree of revving power and perfect hold on the pist.

5. Wax. The final step of every tuning is to bring up wax. It impregnates the covering and enhances the gliding- and revving power of your sports equipment.

With a perfect ski-/ board tuning your enjoy optimal safety and a maximum of skiing fun!